Interested in photography? At matthughesphoto.com you will find all the information about Diy Flash Photography and much more about photography.
10 DIY Photography Lighting Ideas | Speedlight Flash …
- https://expertphotography.com/10-diy-speedlight-flash-modifiers/
- Next, grab an x-acto knife and cut off the bottom of the can to get a bottomless tube. Fit the tube to the front of your speedlight. This might require a little moulding to adapt to the speedlight head shape, but it will fit. Use the plastic lid in front of the tube to produce a soft spotlight with feathered edges.
How To Make an Easy DIY Flash Diffuser for Macro …
- https://expertphotography.com/diy-flash-diffuser/
- Fold it in half and tape it to the tube. It doesn’t matter if the paper covers the sides or not. Try to tape so that the paper follows a smooth curve, and there are no …
How To Build A Flash (With An Optical Slave) - DIY …
- https://www.diyphotography.net/how-to-build-a-flash-with-an-optical-slave/
- none
How to Make a DIY Ring Flash [Tutorial] - Digital …
- https://digital-photography-school.com/how-to-make-a-diy-ring-flash-tutorial/
- Insert the head of your flash in the hole on the side. Don’t push it too far, just a little bit. Use a remote wire, or use the wireless TTL of your flash. Insert your …
20 Cheap But Amazing DIY Photography Lighting Ideas
- https://fixthephoto.com/diy-photography-lighting.html
- none
How to Make an Easy DIY Flash Diffuser for Macro …
- https://photographyspark.com/make-an-easy-diy-flash-diffuser/
- A flash diffuser is an attachment for modifying the light in your photographs. You attach a flash diffuser to the external flash on your camera. It works by increasing the surface from which light is originating, creating softer lighting. The end result is a photo with less distracting or harsh lighting.
How I made a DIY compact flash from a disposable
- https://www.diyphotography.net/how-i-made-a-diy-compact-flash-from-a-disposable-cameras-flash-module/
- The camera flash I built uses the flash circuit from a cheap Fuji QuickSnap disposable camera which I got for only 50hkd ($7 USD). Make sure to discharge the capacitor before handling the circuit! It’s charged up to 300v, so you really don’t want it to touch it while it’s still charged. Flash pcb from a disposable camera.
DIY Lighting Hacks for Digital Photographers
- https://digital-photography-school.com/diy-flash-and-lighting-hacks-for-digital-photographers/
- Another quick DIY on diffusing a flash is to put a little translucent magic tape over a flash (or a piece of white tissue paper can do it too). Any of these methods will decrease the amount of light getting out from the flash onto your subject – hopefully resulting in a more subtle light and a less blown out image. 5. Turkey Pan Beauty Dish
This guy built a high speed DIY LED flash and put the
- https://www.diyphotography.net/this-guy-built-a-high-speed-diy-led-flash-and-put-the-plans-online-so-you-can-make-your-own/
- For most of us, high-speed flash like this is often done with speedlights. They will allow you to get flash durations shorter than 1/10,000th of a second (faster than your camera’s shutter speed will go). Some will even let you go as short as around 1/30,000th of a second. But sometimes even that isn’t fast enough to freeze super fast movement.
DIY FlashBender - DIY Photography
- https://www.diyphotography.net/diy-flashbender/
- Cut 3 squares to the dimensions shown. The mesh cuts easily with sizzors. Staple a doubled over piece of mesh about 3″ high to act as a reinforced spine dead center at the bottom of the mesh square approximately the width of your flash head. Start stapling. Try to stay close to the edge so you can cover the staples with electrical tape later.
Found information about Diy Flash Photography? We have a lot more interesting things about photography. Look at similar pages for example.